DUROFIX RI60166 Інформаційний посібник - Сторінка 4
Переглянути онлайн або завантажити pdf Інформаційний посібник для Ударний дриль-шуруповерт DUROFIX RI60166. DUROFIX RI60166 16 сторінок. Brushless impact wrench
Друкувати сторінку
Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
WARNING
a. Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
b. Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
c. Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock.
d. When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
e. If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
f. NOTE The term "residual current device (RCD)" can be replaced by the term
"ground fault circuit interrupter (GFCI)" or "earth leakage circuit breaker
(ELCB)".
WARNING
a. Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b. Use safety equipment. Always wear eye protection. Safety equipment such as
dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the switch or energising power
tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result in
ELECTRICAL SAFETY
PERSONAL SAFETY
-4