DataBay AVE-301T Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Подовжувач DataBay AVE-301T. DataBay AVE-301T 11 сторінок. Vga and audio cat-x av extender
Також для DataBay AVE-301T: Посібник користувача (15 сторінок), Посібник користувача (16 сторінок)

Друкувати сторінку

User Manual

Installation and Operation

AVE-00 supports different video format by using different cable kit. Section

1 will describe how to extend VGA and Audio signals by PC cable kit and in

Section 2&3, you should find the description of how to use HDTV and TV

cable kit to extend Component, Composite, and S-Video

Section 1: Extend VGA Video and Audio by PC Cable Kit

1. AVE-301T Single-Port Transmitter Installation:

(1) Site Selection: In your first time installation, place Transmitter near the

PC or AV devices (Audio and Video outputs); you can use magnetic

pad to attach the unit on metal plane (Ex. PC / Server Enclosure) or

use attachable rack mounting kit to fix the unit on selected area by

screw or nail.

Unit attached with Rack Mounting Kit and the Rack Mounting Kit

() Connecting Monitor and Speaker: Take a -in-1 cable (VGA + Audio

+ USB Power) to connect the signal from your AV device to the

"VGA+AUDIO IN" port of Transmitter box and then connect monitor and

speaker to the "VGA OUT" and "AUDIO" ports. The Transmitter can

take the power through the USB port or if you are using DVD Player

or other device without USB port, you can plug optional power adaptor

(AC7.5V, 1A ).

One-Port Transmitter

Installation Diagram of System Transmitter AVE-01T

() Function Test: Turn on your AV device, the POWER LED should turn

on green to indicate the POWER ON status and the LEDs above RJ-45

will blink before VGA signal is turned ON and remain ON after VGA

signal is turned ON.

2. Receiver AVE-301R installation and UTP Connection

(1) Site Selection: Please place Receiver in an appropriate place and have

the UTP cable settled for later connection ; you can use magnetic pad

to attach the unit on metal plane or use attachable rack mounting kit to

fix the unit on selected area by screw or nail.

() Power Up: Plug power adapter to the Receiver and connect monitor and

speaker to the "VGA OUT" and "AUDIO" port. The POWER LED will

turn on green to indicate the POWER ON status and the LED above

RJ-45 port should blink to indicate the AV signal unconnected status.

() Selection of UTP Cable: For best VGA resolution, please use Cat5

Enhanced cable (50MHz bandwidth) for connection, please noted that

the maximum extended length of one section (one pair of Transmitter

or Receiver) should not exceed 00 meters. The connector must be

made by 568B/568B type.

VGA Audio USB

in 1 Cable