Durr EcoGun 648 Посібник з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Фарборозпилювач Durr EcoGun 648. Durr EcoGun 648 16 сторінок. Automatic spraying gun

Друкувати сторінку

EcoGun 648

SAFETY REGULATIONS

Grounding of equipment (for flammable application

materials)

Due to the speed of the flow of the liquid at the high spraying

pressure, then under certain circumstances an electro-static charge

may originate in the equipment. When discharging, this may result

in the occurrence of sparks or flames. Therefore, the devices must

be grounded when spraying flammable materials. For connection of

the grounding, see commissioning.

Using the automatic gun

Never put hands or fingers in front of the gun. During assembly

or dismantling of the nozzle, when cleaning or pausing the work,

be careful and make sure that the gun is always secured against

activation to prevent any consequent injury.

Injury to operators

Injury caused by the application material can be very serious. In

the case of injury, immediately contact a doctor and advise which

material caused the injury.

Protection during use

To maintain and handle the application materials, and when cleaning

the equipment, follow the instructions from the manufacturer's of

these materials. To protect the skin, respiratory system and eyes, use

protective working items, respirators, protective masks, breathing

devices, protective glasses, protective creams, etc.).

Pressure resistance

Keep the maximum working pressure of the application material

and working values for the compressed air - for recommended values,

see technical parameters.

Connecting hose

Angular adapters enable to connect the control air hose with an

outside diameter of 6.0mm and the sprayed air with the outside

diameter 8.0mm without special clamping elements. The angular

adjustable threading for the connection of the NH hose is fitted by

cam tightening nut M14x1.5 for the safe and complete connection of

the hose with the diameter 6.0x4.0mm.

Workplace

For spraying and handling flammable liquids, the respective

standards are valid. Premises and rooms in which the work with

painting substances is carried out must be indicated and marked

with respect to the class of flammability pursuant to valid standards

and regulations.