Durr EcoGun 651 Посібник з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Фарборозпилювач Durr EcoGun 651. Durr EcoGun 651 20 сторінок. High-pressure automatic spraying gun
Друкувати сторінку7. Daily on completion of works clean the gun and flush it acc. to
procedure specified in paragraph 5.
NH Filtration
Standard spraying gun is not fitted with the NH filter, for proper
function is thus necessary to ensure perfect filtering of the application
material before inlet to the gun (e.g. F50 filter with the same
replaceable filter cartridge). Size of the filter cartridge in relation to
the nozzle equivalent size is specified in this reference table.
NOZZLE
EQUIVALENT SIZE
IN 0.1MM
from 16
25 - 30
from 40
Daily clean the filter and cartridges as needed, particularly on change
to other NH. Do not let the contaminated filter cartridge dry-up after
removal from the filter, as the NH residuals cannot be removed. The
cartridge must be immersed into proper solvent immediately after
removal from the filter.
The NH filter, which is installed directly to the angle-adjustable NH
fitting on the gun, is optionally available. This filter is fitted with the
MASCHEN sieve 200, 100 or 50. It is also possible to select the NH
fitting thread size between M14x1.5 or G1/4".
FILTER SIEVE SIZE
MESH
200 (74 µm)
100 (149 µm)
60 (250 µm)
USE
pickle, glazing, clear
lacquer, artificial-resin
lacquer
primer, effect lacquer,
fillers, marking paint
dispersion, latex,
acrylic paint,
polyurethane paint
EcoGun 651
9