4IPNET EAP320 V1.20 Посібник зі швидкого встановлення - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Бездротова точка доступу 4IPNET EAP320 V1.20. 4IPNET EAP320 V1.20 15 сторінок. Enterprise access point
Друкувати сторінку
Getting Started
4ipnet EAP320 supports web-based configuration. When hardware installation is complete, EAP320 can be
configured through a PC by using a web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0
and above.
The default values of LAN IP address and subnet mask of EAP320 are:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Steps:
1. To access the Web Management Interface, connect the administrator PC to the LAN port of EAP320 via
an Ethernet cable. Then, set a static IP address on the same subnet mask as EAP320 in TCP/IP of your
PC, such as the following example:
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
2. Launch the web browser on your PC by entering the IP address of EAP320 (https://192.168.1.1) at the
address field, and then press Enter.
3. The following Admin Login Page will appear. Enter "admin" for both the Username and Password fields,
and then click Login.
Copyright © 4IPNET, INC. All rights reserved.
Administrator Login Page
4
Quick Installation Guide
EAP320 Enterprise Access Point
ENGLISH
P/N: V11020120510