4IPNET EAP700 Посібник зі швидкого встановлення - Сторінка 19

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Бездротова точка доступу 4IPNET EAP700. 4IPNET EAP700 20 сторінок.

Step 5. Configure WDS (Wireless Distribution System) Settings

To extend its wireless coverage, EAP700 is capable of creating WDS links for connection to

other WDS-capable APs (peer APs). EAP700 supports up to 4 WDS links; by default, all WDS

profiles are disabled.

Click on the Repeater tab.

Select WDS from drop-down list of Repeater Type.

Configure WDS link parameters:

(a) Enter MAC Address of Remote AP (peer AP).

(b) Select preferred Security Type.

To configure peer AP(s):

After completing the WDS settings at this EAP700 (functioning as a "primary WDS

station"), you must also configure the settings of its peer AP(s).

If you use another EAP700 as the peer AP, simply repeat the above-mentioned steps

with the MAC Address of the primary WDS station for setting WDS link parameters of

the peer AP(s).

Besides setting up your WDS connections manually, EAP700 also provide a

quick and easy way to establish WDS connection using 4ipWES

(Press-n-Connect). Make sure that you have 2 EAP700 APs set to the same

band, simply by pressing the WES button on both AP devices, and they will

Note:

establish a wireless/WDS connection with each other without further

configuration. For more detailed instructions on 4ipWES feature, please refer to

the User Manual – 4.6 Advanced Features.

EAP700 Enterprise Access Point

Quick Installation Guide

ENGLISH