4IPNET EAP706 Посібник зі швидкого встановлення - Сторінка 14
Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Бездротова точка доступу 4IPNET EAP706. 4IPNET EAP706 19 сторінок. Enterprise access point
Друкувати сторінку
Step 2. Configure General AP (Access Point) Settings
Click on the Wireless icon on the main menu, and then select the General tab.
Select the RF card you would like to set up.
Determine the Band and Channel settings:
Select your preferred Band, Protocol and Channel for you wireless connection. For example, select
2.4GHz for the band, 802.11g+802.11n for the protocol and 6 for the channel.
Admin should be aware of Dynamic Frequency Selection (DFS) mandated on some channels of the
5GHz band. When an EAP705 detects interference, this mechanism will limit the ability to broadcast
the SSID on one of the channels listed below:
1) Country Code: 841 (US)
Note:
DFS Channels: 52 56 60 64 100 104 108 112 116 132 136 140 149 153 157 161 165
2) Country Code: 250 (EU)
DFS Channels: 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
Copyright © 4IPNET, INC. All rights reserved.
Wireless General Settings Page
10
Quick Installation Guide
EAP706 Enterprise Access Point
ENGLISH