Caviblaster 0520-G Посібник з експлуатації та обслуговування - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з експлуатації та обслуговування для Прибиральне обладнання Caviblaster 0520-G. Caviblaster 0520-G 10 сторінок.
Друкувати сторінкуShutting down the CaviBlaster® power unit:
1. Adjust engine RPM to "MIN" (Figure 16).
2. Shut off the engine by turning the run switch to the "OFF" position (Figure 12).
3. Squeeze the gun trigger to the open or "ON" position to release the water pressure remaining in
the hose(s) while the gun is submerged.
4. It is now safe to remove the gun from the water.
5. Flush the system and rinse the power unit with fresh water at the end of the day.
Maintenance of the CaviBlaster® unit:
1. Check the oil level and consistency in the engine and pressure pump every day.
2. Flush the system and rinse the power unit with fresh water after each days use, for at least 5
minutes, to make sure all inside residuals are removed.
3. Change the engine oil after the first month or 20 hours and every six months or 100 hours
thereafter. Replace the oil filter every 200 hours. Use SAE 10W-30 oil for general all- temperature
use.
4. Clean the air cleaner cover, filter elements and base every three months or 50 hours. Replace the
paper filter element every twelve months or 300 hours or if damaged or excessively dirty.
5. Change the oil in the pressure pump after the first 50 hours and every 500 hours thereafter. Use
single-weight lubricating oil (SAE 30 weight non-detergent)
6. Change the spring for the gun trigger every 12 months or less as required.
Pressure Regulator Knob - Figure #19