Cayin CS-6 PH Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Cayin CS-6 PH. Cayin CS-6 PH 14 сторінок. Vacuum tube phono preamplifier

Front Panel

①.Power On/Off: Turn on and off the amplifier. Press

"down" the button to turn on the amplifier, Press again

the button will resume to original position and the

amplifier will power off.

②.Power Indicator: Used to indicate the working state.

The indicator will be on when it is working normally.

The indicator will flicker for 60 seconds when it delays

to work. The indicator will keep flickering when it is at

mute state.

③.OUTPUT：Indicate the operation state of the

amplifier. Power LED and operate LED are on

when it works normally. Mute LED is on when it is

at soft state and mute.

OUTPUT

POWER

OPERATE

MUTE

OFF

VACUUM TUBE PHONO PREAMPLIFIER CS-

INPUT

CAP

RUMBLE

GAIN

HIGH

MED

100

OFF

LOW

④.INPUT：Choose MM or MC input.

⑤.CAP：Choose input capacitance of MM

47pF/100pF.

⑥.RUMBLE：Switch ON/OFF the low pass

filter circuit of the output signal.

⑦.GAIN：Choose gain of MC output.

Selection can be high, MED, and low.

⑧.IMPEDANCE：Choose the suitable

impedance according to the MC cartridge.

Cayin CS-6PH has memories and it will default

last operation state when turning on.

IMPEDANCE

200

100

470

1000