Elsner 10150 Технічний опис, інструкція з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Технічний опис, інструкція з монтажу для Контролер Elsner 10150. Elsner 10150 20 сторінок. Radio control system
Також для Elsner 10150: Операція (13 сторінок)
1.
Range of application and functions
Solexa II controls via a wireless connection drives and devices on Elsner electronic
wireless actuators and makes the convenient manual operation of these drives and
consumers possible.
The basis of the system are the Solexa II display and weather station, which allow for
automatic control according to time, indoor temperature, outdoor temperature, bright-
ness, sun position, wind speed and precipitation.
•
The shading automatic with weather station controls shutters, awnings and
blinds according to the brightness and takes into account the direction of the
sun, movement delays set, temperature blocks, wind, rain and frost alarms,
movement position, timer and night functions.
•
The ventilation automatic with weather station controls casement and
sliding windows based on the indoor temperature. In doing so, outdoor
temperature, wind, rain and frost alarm, movement position and timer
functions are taken into account.
•
The light automatic with weather station switches lights on and off according
to the outdoor brightness (day/night) and time. If dimming modules are used,
then the dim level (brightness of the lamp) is also taken into account.
•
The heating automatic with weather station switches a one or two level
heating according to the indoor temperature and takes into account day and
night (timer switch) and has a timer switch for manual heating during night-
time operation.
•
The roof gutter automatic with weather station switches a heating within a
certain temperature range.
•
For all outputs a daily automatic reset and an automatic reset, a short time after
a manual operation, can be set.
Functions and characteristics of the Solexa II display:
•
Operating part with monochrome touch display, indoor temperature sensor
and real-time clock. Fixed integrated battery with USB charging socket.
The display has a wall bracket, but can also be used like a remote control
Functions and characteristics of the Solexa II weather station:
•
Brightness measurement (1 sun sensor), temperature measurement, wind
speed measurement, precipitation recognition and GPS receiver for date/time
and installation coordinates (sun position calculation)
•
Weather station for use with up to 4 Solexa II displays
•
Weather station with a connection for a 230 V motor (integrated motor control
unit), for up to 16 Elsner RF wireless actuators and up to 32 Elsner RF-operating
devices/sensors
•
Integration of the weather station in the WLAN (for app usage) via optional
interface SOL
Solexa II Control • from software version 1.9
Version: 28.09.2016 • Technical changes and errors excepted.
5
Range of application and functions