DataLocker Sentry K300 Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Клавіатура DataLocker Sentry K300. DataLocker Sentry K300 19 сторінок. Encrypted keypad mssd with oled screen
Також для DataLocker Sentry K300: Посібник з розгортання (10 сторінок), Посібник рецензента (10 сторінок)

Друкувати сторінку

1. Password Reset

Using Standalone Logins

On next unlock of the Sentry K300, select Standalone using the keypad to unlock in Standalone

Mode. When in Standalone mode, the Unlocker partition will not be mounted to the host computer

and the DataLocker Control Panel will not need to be executed.

1. Unlock the device. See

2. Locate the Standalone screen by pressing the Up or Down key. Press Enter to select.

3. Physically connect the device to a host with USB Mass Storage Support. This will decrease the

Currently Available count of Standalone logins by one.

To continue to use the Sentry K300 in the normal SafeConsole mode, select SafeConsole in step 2.

To access the

Main

Menu, Standalone will need to be selected in step 2. The Currently Available

count will not be impacted unless connected to a host computer.

Note: The currently available number of Standalone logins will be reset to zero if a SafeConsole

Administrator remotely disables or factory resets your Sentry K300. Currently available will also be

set back to zero after a password reset or when the device is blocked by GeoFence.

Password Reset

In the event that the Sentry K300 cannot be unlocked due to a forgotten password, a recovery

password can be sent by A SafeConsole Administrator.

1. Enter the recovery password using the Sentry K300 keypad. Pressing the keypad multiple times

within one second will select the next character assign to that button. For example pressing

the button with the number 3 twice will input the letter 'D'.

Unlocking Your Device

Sentry K300 Managed User Guide

for more information.