DataLocker Sentry K300 Посібник рецензента - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник рецензента для Клавіатура DataLocker Sentry K300. DataLocker Sentry K300 10 сторінок. Encrypted keypad mssd with oled screen
Також для DataLocker Sentry K300: Посібник користувача (19 сторінок), Посібник з розгортання (10 сторінок)

Друкувати сторінку

Menu Features

Device Information

To see information about the device without logging into it, press and hold the P ower button for

3 seconds. Before entering the password, press E nter . Use the U p and D own arrow keys to

see different information.

Device information shown:

● Device Name

● Firmware Version

● Capacity

● Alpha-numeric Serial Number

● QR Code Serial Number

● Certificated Logo

● Patent

Read-Only Mode

This option protects the contents of the drive by not allowing users to alter or add files. This

feature can be enabled in two different capacities.

● All users and administrators: Can be enabled by the administrator and user in the

Screen Selection Menu. Enabling this feature here will force the device to launch in

Read-Only Mode until the device is locked. This is helpful when using unknown

computers.

● Users only: Can be enabled by the administrator in the Administrator Menu. Enabling

this feature here will force the device to launch in Read-Only Mode for U sers only until

the feature is turned off. For more information on finding the Administrator Menu, see

Administrator Menu Screen Options.

Boot Mode

After authentication, selecting Boot Mode from the Selection Screen allows you to boot an

operating system, such as Windows To Go, from the Sentry K300. In this mode, the device can

lose momentary connection with the computer and remain unlocked. Only select Boot Mode

when planning to run an operating system from the Sentry K300. For a more secure connection,

it is recommended to use C onnect Mode , unless Boot Mode is specifically needed.

If Boot Mode is selected and the device is connected to an operating system like a normal flash

drive, it will automatically be remounted after safely ejecting. To lock your device, physically

remove it from the computer.

To use boot mode:

Install an operating system on the drive. During installation of an operating system to

the Sentry K300, the drive does not need to be in Boot Mode. For installation

instructions, please refer to the portable operating system's guide.