Dusky D2O Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Dusky D2O. Dusky D2O 13 сторінок.

Introduction

Congratulations on your purchase of the D₂O Amplifier from Dusky Electronics.

Your amplifier is designed to provide you a lifetime of dependable service and

superior sound, while allowing you to achieve your artistic goals with a minimum

of fuss.

We encourage you to register your amplifier at the Dusky Electronics website. You

can do so at h ttps://duskyamp.com/pieces/register

You do not have to be the original owner to register. Registration is required for

any warranty work for the original owner and may also help to establish a record

of ownership in the event it may be required for insurance purposes or tracking

down the provenance of a stolen amp.

Overview

The Dusky Electronics D₂O Amplifier is a 32watt vacuum tube instrument

amplifier head designed for use with any electronic instrument, especially electric

guitar or bass. The D₂O Amplifier supports speaker loads of 4Ω, 8Ω, or 16Ω. The

32watt output may be reduced to 8 watts by means of a rearmounted toggle

switch, allowing a greater amount of breakup distortion to be achieved at lower

sound pressure levels. The D₂O Amplifier's complement of tone controls is unique

in the market and allows a wide range of control while remaining easy to use,

making the D₂O uniquely adaptable to just about any instrument, speaker

cabinet, or musical situation.

The D₂O Amplifier is a new, original design amplifier that employs a classic

architecture—a minimal, clean twostage preamplifier driving a cathode biased

power amplifier section. As signal level increases the power amplifier section is

driven into distortion just a little before the preamplifier section, much like many

classic guitars amplifiers from the 1950s and 1960s.

The Front and Rear Panels

Pictured here is the front control panel of the D₂O Amplifier:

From left to right we have: