4IPNET APM100 Посібник користувача - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник користувача для Контролер 4IPNET APM100. 4IPNET APM100 20 сторінок. Access point
Друкувати сторінкуChannel Switching: Enable/Disable feature to
allow APs configured as sensors to scan for
channel interferences and switch to the lowest
utilized channel.
Sensor List: View and configure managed APs
to be set as a Sensor for Rogue AP Detection.
Select from the AP Model drop-down list and
click "List" to show available APs that can be set
as Sensors. Administrators may select one or
more APs as sensors to scan for rogue APs.
Click "View" to see logs regarding Rogue AP
detection.
Supported
EAP737,
EAP760,
OWL630.
Trusted APs: The Trusted AP List allows the
administrator to maintain a list of detected
rogue APs and add them as a "Trusted AP".
Trusted APs will not be displayed in the Rogue
AP List in future scans.
Rogue AP List
This list includes all detected Rogue APs. Each
rogue AP will be presented with relevant
information such as its BSSID, ESSID, Channel,
Encryption, Report Time etc. By checking the
checkboxes, the selected Rogue APs on this list
can be added into the Trusted AP List or deleted
if it can be ignored.
Add to Trusted AP List: Select AP(s) from the
Rogue AP List and add to the Trusted AP List.
Delete: Select AP(s) from the Rogue AP List
and delete it from the Rogue AP List.
Search Bar: ESSID, BSSID, Channel, or
Encryption can be searched from the Rogue AP
List.
Rogue AP List Table: The list includes the
following information on each AP; AP No.,
Rogue AP BSSID, ESSID, Type, Channel,
Encryption, RSSI and Report Time.
3.11
AP Load Balancing
When the system detects the occurrence of
APs' associated-client numbers exceeding a
predefined threshold at circumstances other
Copyright © 2017, 4ipnet, Inc. All rights reserved. All other trademarks mentioned are the property of their respective owners.
AP
models
include
EAP767,
OWL530
and
APM100 Access Point Controller
APs in the same group are still below the
threshold, the balancing function will
activated. The system divides the managed APs
into groups, the administrators define the
group's threshold, and a time interval which
triggers the AP load balancing feature.
AP Load Balancing
Load Balancing: Enable/Disable the feature.
The default setting is "Disable".
AP Distance: The AP distance (with reference
to the Map) configured here determines the
Cluster grouping for load balancing. Click
"Apply" to activate changes.
Interval: A balance interval can be set for the
APs to check periodically for load balance. The
valid range of Scanning Interval is from 1 to
999 minutes. Click "Apply" to activate changes.
Threshold:
A
threshold
Balancing can be set with number of clients or
the number of packets. When the number of
clients/packets is reached, load balancing will
begin.
Cluster: Click "Configure" for Cluster to show
clusters grouping and their status.
Device List
AP Type: Select from the dropdown list for
APs configured in a cluster for AP Load
Balancing.
Device List: Displays all the managed APs
sorted
by
model
information such as Cluster, Device Name,
User Manual ENGLISH
be
value
for
Load
name
with
relative
13