Cayken SCY-520WEQ Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Різак Cayken SCY-520WEQ. Cayken SCY-520WEQ 9 сторінок. Wall cutter
Друкувати сторінкуChapter2. Key Points to Use the Cutter
1.The use of power supply
Make sure that whether the power supply is equipped with creepage
prevention device.If not,you can buy it by yourself.Please wear
rubber shoes and rubber gloves before operation for sake of
safety.
2.Protect the inside of the motor from water
If water comes into the inside of the motor,it will arouse
electric shock or burn the motor.
3.Cool the cutter in the inlet valve
Because superheated saw web's longevity will be short,pay
attention to supply water to the inlet valve in the cutting
procedure.In addition,please note that do not use recycled
water,or else it will affect the smoothness of the runninr
water,causing damage to the water seal and so on.
4.Fix the machine safely
Fix the machine safely.Improper way of installation will not
only prevent normal operation,but be dangerous.
5.Use diamond saw web
The cutter is designed for using diamond saw web.Do not replace
the diamond saw web with other cutting devices.
6.The machine is attached with adjustable clutch
If you clamp down overly in operation or the saw web is stuck by
the reinforcing steel bar suddenly.the clutch will start to
protect the saw web from being damaged.If the clutch skids,it
does not mean the machine is damanged.Just withdraw the reamer
and tighten the clutch and then start the clutch again.
7.Let the saw web run fully before cutting
Turn on the switch,waiting the saw web run fully and then start
cutting.
8.Do not touch the running saw web with your hands
Note that never touch the running saw web with your hands,which
is dangerous and will lead to serious results.
9.Aloft operation
If the machine is in aloft operation,please notice to fix it in
balanced and steady place.
10.The cutter makes transverse cutting
Because the machine must use the cooling water in operation,the
man
5
motor
is
on
top
when
cutting.Contrarily,if the saw web is on top,water will come
into the motor.It is very dangerous.
11.Pay attention when the cutter cuts through the floor
When the cutter cuts through the floor,the cut parts will
fall down after cutting.Thereby take protecting measures
under the cut parts to protect the safety of people and
properties.
12.Abnormal motion
If the saw web stops or there is abnormal sound in the
process of cutting,
turn it off.
13.Clean up the machine after use
To keep the machine's service life, keep it tidy after
use.
Chapter3. Regulations
Cutting
Rated
Modle
Diameter
Voltage
(mm)
SCY-320WEQ
800mm
SCY-420WEQ
1000mm
SCY-520WEQ
1200mm
※In order to keep improving our products,we reserve the
rights of making changes to technical data without advance
notice.
the
cutter
makes
transverse
Rated
Input
Cutting
Frequency
Power
Depth
(v)
(Hz)
(w)
220V~
50-60Hz
6280W
320mm
220V~
50-60Hz
7280W
420mm
220V~
50-60Hz
7980W
520mm
6
(mm)