Datalogic Gryphon I GBT4130 Посібник зі сканування - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник зі сканування для Зчитувач штрих-коду Datalogic Gryphon I GBT4130. Datalogic Gryphon I GBT4130 8 сторінок. General purpose handheld linear imager barcode reader with bluetooth wireless technology
Друкувати сторінкуSetting the Interface to USB Keyboard
USB Keyboard with standard key encoding - this Interface selection requires that you scan only one programming barcode.
DO NOT scan the ENTER/EXIT Programming Mode prior to scanning the Select USB Keyboard.
Resetting Standard Product Defaults
If you aren't sure what programming options are in your Reader, or you've changed some options and want the factory
settings restored, the barcode below will restore the factory configuration for the currently active interface.
YOU MUST configure the Reader for the correct Interface before scanning this Label.
DO NOT scan the ENTER/EXIT Programming Mode prior to scanning the Standard Product Default Settings.
Factory defaults are based on the interface type – scan Select USB Keyboard before scanning this Label.
Stand Detection
The following selection controls how the scanner behaves when it is placed into the Base Station. The setting will disable
mode switching when the scanner is placed in the Base.
DO NOT scan the ENTER/EXIT Programming Mode prior to scanning the Ignore Autorecognition.
~ (tone pattern) # # > # # # # > # # # melodic ascending ~
~ (tone pattern) # # > # # # # > # # # melodic ascending ~
~ (tone pattern) # # > # # # # > # # # melodic ascending ~
Page 3 of 8