Dustbane Hurricane 900 XTT Короткий посібник - Сторінка 2

Переглянути онлайн або завантажити pdf Короткий посібник для Скруббер Dustbane Hurricane 900 XTT. Dustbane Hurricane 900 XTT 2 сторінки.

Друкувати сторінку
DAILY MAINTENANCE
Clean the dirty
water tank.
Clean the dirty water tank.
Clean the dirty
Clean the dirty
water tank.
water tank.
water tank.
Make sure the brushes/drive pad are
brushes are clean.
Check that the
clean and not worn out. Replace if
brushes are clean.
necessary.
Check that the
Check that the
unscrew the wing nuts fixing the blade retainer;
REPLACING THE SQUEEGEE BLADES
brushes are clean.
brushes are clean.
remove the blade retainer;
remove the blade;
put the same blade back, reversing the edge in contact with the floor, or replace with a new one;
Unscrew the wing nuts fixing the blade retainer.
unscrew the wing nuts fixing the blade retainer;
reposition the blade retainer and fix the wing nuts back;
unscrew the wing nuts fixing the blade retainer;
remove the blade retainer;
remove the blade retainer;
remove the blade;
remove the blade;
put the same blade back, reversing the edge in contact with the floor, or replace with a new one;
unscrew the wing nuts fixing the blade retainer;
Remove the blade retainer.
put the same blade back, reversing the edge in contact with the floor, or replace with a new one;
reposition the blade retainer and fix the wing nuts back;
remove the blade retainer;
reposition the blade retainer and fix the wing nuts back;
remove the blade;
REPLACING THE SQUEEGEE BLADES
put the same blade back, reversing the edge in contact with the floor, or replace with a new one;
Remove the blade.
reposition the blade retainer and fix the wing nuts back;
unscrew the wing nuts fixing the blade retainer;
unscrew the wing nuts fixing the blade retainer;
Attaching:
remove the blade retainer;
remove the blade retainer;
Press the "Click-Off-On" button. The machine first performs a release operation, then immediately afterwards enables the attachment
Put the same blade back, reversing the edge in contact with
remove the blade;
remove the blade;
operation. Press the "Click-Off-On" button again to automatically attach the brushes.
put the same blade back, reversing the edge in contact with the floor, or replace with a new one;
Releasing:
put the same blade back, reversing the edge in contact with the floor, or replace with a new one;
the floor, or replace with a new one.
reposition the blade retainer and fix the wing nuts back;
Press the "Click-Off-On" button, the machine releases the brushes.
reposition the blade retainer and fix the wing nuts back;
Attaching:
Press the "Click-Off-On" button. The machine first performs a release operation, then immediately afterwards enables the attachment
Attaching:
Reposition the blade retainer and fix the wing nuts back.
operation. Press the "Click-Off-On" button again to automatically attach the brushes.
Press the "Click-Off-On" button. The machine first performs a release operation, then immediately afterwards enables the attachment
Releasing:
operation. Press the "Click-Off-On" button again to automatically attach the brushes.
Press the "Click-Off-On" button, the machine releases the brushes.
Releasing:
Attaching:
Press the "Click-Off-On" button, the machine releases the brushes.
ATTACHING/REMOVING THE BRUSHES
Press the "Click-Off-On" button. The machine first performs a release operation, then immediately afterwards enables the attachment
ATTACHING/REMOVING THE BRUSHES
operation. Press the "Click-Off-On" button again to automatically attach the brushes.
Releasing:
Press the "Click-Off-On" button, the machine releases the brushes.
Attaching:
Attaching:
Attaching:
Press the CLICK ON-OFF button. The machine first performs
Press the "Click-Off-On" button. The machine first performs a release operation, then immediately afterwards enables the attachment
Press the "Click-Off-On" button. The machine first performs a release operation, then immediately afterwards enables the attachment
operation. Press the "Click-Off-On" button again to automatically attach the brushes.
operation. Press the "Click-Off-On" button again to automatically attach the brushes.
a release operation, then immediatley afterwards enables the
PLDC01851
Releasing:
Releasing:
Press the "Click-Off-On" button, the machine releases the brushes.
attachment operation. Press the CLICK ON-OFF button again
Press the "Click-Off-On" button, the machine releases the brushes.
to automatically attach the brushes.
PLDC01851
Removing:
PLDC01851
Press the CLICK ON-OFF button, the machine releases the
brushes.
PLDC01851
Dustbane Products Ltd., 1000 Last Mile Dr., Ottawa, ON K1G 6Y1 • Tel: 1-800-387-8226 Fax: 1-800-363-5309 www.dustbane.ca
PLDC01851
PLDC01851
DAILY MAINTENANCE
Clean the dirty
Clean the dirty
water tank.
Clean the dirty
water tank.
Make sure the suction filter and debris
water tank.
Check the suction filter is
filter is clean and undamaged.
undamaged and clean.
Clean the dirty
water tank.
Check that the
brushes are clean.
Check that the
Check that the
Make sure the squeegee is clean and
brushes are clean.
the blades are not worn.
Check that the
squeegee is clean
and the blades are not
REPLACING THE SQUEEGEE BLADES
REPLACING THE SQUEEGEE BLADES
worn.
Check that the
brushes are clean.
REPLACING THE SQUEEGEE BLADES
REPLACING THE SQUEEGEE BLADES
REPLACING THE SQUEEGEE BLADES
unscrew the wing nuts fixing the blade retainer;
remove the blade retainer;
ATTACHING/REMOVING THE BRUSHES
remove the blade;
ATTACHING/REMOVING THE BRUSHES
put the same blade back, reversing the edge in contact with the floor, or replace with a new one;
reposition the blade retainer and fix the wing nuts back;
ATTACHING/REMOVING THE BRUSHES
Attaching:
ATTACHING/REMOVING THE BRUSHES
ATTACHING/REMOVING THE BRUSHES
Press the "Click-Off-On" button. The machine first performs a release operation, then immediately afterwards enables the attachment
operation. Press the "Click-Off-On" button again to automatically attach the brushes.
Releasing:
Press the "Click-Off-On" button, the machine releases the brushes.
PLDC01851
DAILY MAINTENANCE
DAILY MAINTENANCE
DAILY MAINTENANCE
DAILY MAINTENANCE
DAILY MAINTENANCE
DAILY MAINTENANCE
DAILY MAINTENANCE
Check the suction filter is
Check the suction filter is
Check the suction filter is
undamaged and clean.
undamaged and clean.
Check the suction filter is
undamaged and clean.
undamaged and clean.
Check the suction filter is
Check the suction filter is
undamaged and clean.
undamaged and clean.
Check the suction filter is
undamaged and clean.
Check that the
squeegee is clean
and the blades are not
Check that the
Check that the
worn.
squeegee is clean
Check that the
squeegee is clean
and the blades are not
squeegee is clean
and the blades are not
worn.
and the blades are not
worn.
Check that the
worn.
Check that the
REPLACING THE SQUEEGEE BLADES
squeegee is clean
squeegee is clean
and the blades are not
and the blades are not
worn.
worn.
squeegee is clean
and the blades are not
ATTACHING/REMOVING THE BRUSHES
REPLACING THE SQUEEGEE BLADES
ATTACHING/REMOVING THE BRUSHES
Ref. 1
detergent outlet filter
Check that the
Make sure detergent outlet filter is
detergent outlet filter
clean and free of debris.
is clean.
TO CHARGE BATTERIES
1. Disconnect battery pack from the
machine.
2. Connect battery pack to the charger.
Check that the
3. Plug in charger to power outlet.
worn.
NOTE: Never stop charge until cycle is
complete (Green light).
P2
P1
P3
P2
3
P2
2
P3
3
P3
P2
3
2
P1
Click-O
Click-O
Click-On
Click-On
P3
3
P2
P2
P2
1
2
P3
P3
P3
3
3
Check that the
Check that the
detergent outlet filter
Check that the
detergent outlet filter
Check that the
detergent outlet filter
is clean.
is clean.
Check that the
Check that the
is clean.
is clean.
detergent outlet filter
detergent outlet filter
is clean.
is clean.
Check that the
detergent outlet filter
is clean.
Click-O
Click-O
P1
Click-On
Click-On
1
Click-O
Click-O
2
Click-On
Click-On
P1
Click-O
Click-O
Click-On
Click-On
O
1
1
P1
Click-O
Click-O
Click-On
Click-On
P1
Click-O
Click-O
Click-On
Click-On
P2
2
1
6
5
2
4
1
3
P3
2
3
1
P1
Click-O
Click-O
P1
Click-O
Click-O
Click-On
Click-On
Click-On
Click-On
O
1
On
1
0
1
O
2
2
On
6
3
5
0
0
+
1
1
4
-
3
0
2
1
1
0
1
O
On
O
On
6
On
5
+
O
4
-
On
3
O
2
On
1
O
O
On
On
O
O
+
On
On
6
-
5
+
4
6
-
O
5
+
3
4
2
O
-
3
1
2
1
6
O
5
+
4
On
-
3
2
1
6
5
4
-
3
2
1