CB2 CHARLIE Інструкція з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Внутрішнє оздоблення приміщень CB2 CHARLIE. CB2 CHARLIE 5 сторінок. Cabinet

Друкувати сторінку

charlie

CABINET

hinge adjustment

If the doors do not appear square or aligned,

loosen or tighten the appropriate screws on

each case hinge as illustrated.

Side to side adjustment:

Loosen screw A, adjust gap with

screw B and re-tighten screw A

Depth adjustment:

Loosen screw A, push hinge arm

forwards or backwards, re-tighten

screw A and secure screw B with

a 1/4 turn clockwise

Height adjustment:

Loosen screw C, adjust door

height and re-tighten screw C

For added safety and stability, it is recommended that the wall

mounting hardware be installed. For safe mounting, it is essential

to use wall anchors appropriate to your wall type (i.e. plaster,

drywall, concrete, etc.). Mount to wood studs whenever possible.

NOTE: If you are unsure about your wall type or what

mounting method you should use, consult a qualified

professional or your local hardware store.

A) Attach 2 mounting brackets to top of unit using 2 small

screws per bracket.

B) Determine the final location of unit. Mark position on the wall,

approximately 2" below the mounting bracket mounted to the

back of the unit.

C) Drill a hole in the wall stud. If the wall stud is not available, drill

a hole in the wall that is slightly smaller in diameter than the

anchor. Gently tap the plastic anchor until the flange of the

anchor is flush with the wall.

D) Attach 2 mounting brackets to the wall by inserting 2 large

screws through each mounting bracket and into the wall anchor

in the wall.

E) Place the unit so the mounting brackets on the back edge are

aligned with the wall brackets.

F) Lace one end of the wall strap through both brackets, and

into the other end of the strap.

G) Pull the strap tightly until secure.

Wall mounting assembly is now complete.

cleaning and care

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.

Made in Vietnam - r07

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

WALL

Page 5 of 5