Datalogic MAGELLAN 3410VSi Посібник з інтеграції - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник з інтеграції для Сканер Datalogic MAGELLAN 3410VSi. Datalogic MAGELLAN 3410VSi 20 сторінок. Omni-directional imaging scanner
Друкувати сторінку
ELECTRICAL INTEGRATION
Supply Voltages
5V-12V DC Input
5V USB Input
POS HOST INTERFACE
The POS host can be set to operate in the following interface protocols
•
•
•
•
Refer to the Magellan 3410VSi Product Reference Guide for details on how to select
these interfaces.
Table 1. POS Host Cable Pinouts
PIN #
1
2
3
4
5
6
7
8
9
10
SERVICE PORT INTERFACE
The service port is a high-speed USB device interface adhering to the CDC-ACM USB
device class. It is used to configure the scanner. This port uses a Type-B Micro USB con-
nector.
9
MAGELLAN 3410VSI OEM
NAME
RS232
USB OEM
USB COM
USB Keyboard
RS-232
USB-OEM
CTS
RTS
RXD
TXD
VIN
VIN/BUS
GND
GND
ERI
A dedicated power jack for DC input power. This
input must be used when an external handheld
scanner is attached to the Aux port. Please use
only Datalogic brand power supply.
5V DC provided by the POS connector when the
USB interface is in use. Note that the USB inter-
face will only supply enough power for the 3410
OEM. If an auxiliary device (handheld) is con-
nected, power must be provided via the 5V-12V
DC input jack.
USB, USB
KEYBOARD,
USB COM
D+
D+
D-
D-
VIN/BUS
GND
ERI
ERI
DESCRIPTION
NOTES
USB Data+
RS232 CTS input
USB Data-
RS232 RTS output
RS232 RXD input
RS232 TXD output
5V DC input - must be limited to
5V
Ground
External read indicator output