Datalogic Magellan 9800i Короткий довідник - Сторінка 15

Переглянути онлайн або завантажити pdf Короткий довідник для Сканер Datalogic Magellan 9800i. Datalogic Magellan 9800i 20 сторінок. Scanner and scanner-scale with imaging technology
Також для Datalogic Magellan 9800i: Посібник з налаштування (14 сторінок)

Друкувати сторінку

Datalogic Magellan 9800i Короткий довідник

Error Codes

Upon startup, if the scanner sounds a long error tone then alter-

nating flashing of the green and yellow LED indicators, and an

error code is displayed on the Health & Status Indicator, the

scaner has not passed its automatic Selftest and has entered FRU

(Field Replaceable Unit) isolation mode. The scanner remains in

this mode until any button is pushed.

After a button is pushed, the scanner flashes the green LED a set

number of times to indicate the error code. After one cycle of

flashing has passed, another button push resets the scanner. The

PRG describes the LED flash codes associated with an error found. If your scanner indicates

any of these errors, note the code number, then contact Helpdesk for assistance.

Label Programming Mode Indications

These indications occur only when the scanner is in Programming Mode or when placing the

scanner in that mode.

INDICATION

Label Programming Mode Entry

Acceptance of Partial Labels

Partial Label Reading Cancel

Acceptance of Complete Labels

Sensormatic

EAS Indications

If the scanner is equipped with the optional Sensormatic EAS option, various deactivation

and validation indications will be enabled.

INDICATION

Entering EAS Coupled Mode

Upon sensing an inactive to active transition*

Upon sensing an active to inactive transition*

Upon receiving validation of EAS tag deactiva-

tion*

EAS Bad Beep*

*While in EAS Coupled Mode.

Quick Reference Guide

LED

Continuous blink 1 sec. ON / 1 sec. OFF

N/A

EAS LED

Green ON

Red ON

Green OFF

Red OFF

Green ON

Orange ON until EAS

beeper turns OFF

N/A

BEEP(S)

Same as good read indication

BEEPER

Count

Frequency

Volume

N/A

~ 1500 Hz

Current

Same as FRU error tone

Duration

Configurable