Datalogic Magellan 9800i Посібник з налаштування - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник з налаштування для Сканер Datalogic Magellan 9800i. Datalogic Magellan 9800i 14 сторінок. Scanner and scanner-scale with imaging technology
Також для Datalogic Magellan 9800i: Короткий довідник (20 сторінок)
Друкувати сторінку
Last-Digit Capture
1
Scan this barcode to enter programming mode. After scan, the green light on the top of the
scanner/scale will flash, indicating the device is in programming mode.
2
Enable/Disable last-digit capture with these barcodes:
To enable scanning of the last digit of UPC-A barcode numbers, scan this barcode and wait for the
double beep to confirm success.
To disable scanning of the last digit of UPC-A barcode numbers, scan this barcode and wait for the
double beep to confirm success.
3
To finalize last-digit capture configuration, scan this barcode. After scan, the device will reboot and
the green lights will stop flashing, indicating the device has exited programming mode.
A Global Payments Company
Magellan 9300i/9400i/9800i Setup Guide
Page 10