2easy DMR11-S4 Посібник із швидкого старту - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Домофонна система 2easy DMR11-S4. 2easy DMR11-S4 16 сторінок.

3. Monitor Mounting and User Code Setup

3.1. Monitor Mounting

3.2. What's User Code

In 2-wire DT system, each Monitor installed in system must be programmed with a calling address or calling number, which is User

Code.

For Monitor, User Code is defined by 1~5 bits DIP switchers on the back of Monitor, according the User Code rules. For example, if you

want to program the Monitor's User Code to be "03", the Monitor's 1~5 bit DIP switches should be set as: ON, ON, OFF, OFF, OFF.

For Door Station, each Call Button on panel is assigned to a specified User Code, and press this button will call related Monitor. For

example, press the call button pre-defined as "03", system will launch a call to the Monitor which programmed with "03" User Code.

The User Code array on panels has been pre-defined as below, that's the default mapping as follow:

DMR11-D8

POWER

IN-USE

INTERCOM

1 2 3 4 5 6

UNLOCK

TALK/

MONITOR

EP11-D24

DIPS

BT1

BT2

1 2 3 4 5 6

GND

DMR11-S4

EP11-S12

- 12 -

CALL

UNLOCK

TALK/MON

IN-USE

SW+

SW-

1 2 3 4 5 6

EXT-RING

GND

VIDEO

EP11-S12