4KDVB CV-F01-RX Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Подовжувач 4KDVB CV-F01-RX. 4KDVB CV-F01-RX 4 сторінки. Fiber optic extender

7. Parameter Setting

The CV-F01-RX is available in the setting of contrast, brightness and saturability through the

configuration tool. The setting steps are as follows:

Step 1: Connect the CV-F01-RX to the control computer by using the DB9 pin RS232 female

cross serial line with the item.

Step 2: Put the CD into the control computer and decompress the configuration tool folder

that burned in the CD and install the tool. (You can also ask the technical specialist for the

configuration tool folder.)

Step 3: Double clicking the configuration tool

will enter into the

Communication Setting interface. Select serial port and baud rate as shown in figure 3. After

that, click the OK button.

Figure 3 Communication setting interface

Step 4: Parameter setting interface will show up after click the OK button in step 3. Details as

shown in figure 4. You can set the corresponding value of brightness, saturation and contrast

according to the actual demand.

CV-F01-RX User Manual