4KDVB HD-F01-TX Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Подовжувач 4KDVB HD-F01-TX. 4KDVB HD-F01-TX 8 сторінок. Fiber optic extender

8. OSD Setting

Step 1: Connect the HD-F01-TX to the control computer by using serial cable that comes

with the item. (The serial cable contains one 3.5 mm ear jack male connector and one DB9

pin female connector.)

Step 2: Put the CD into the control computer. Decompress the configuration tool folder that

burned in the CD and install the tool. (You can also ask the technical specialist for the

configuration tool folder.)

Step 3: Double-click the configuration tool

Setting interface. Select the serial port and baud rate as shown in figure 3. After that, click the

OK button.

Step 4: OSD setting main interface will show up after click the OK button in step 3. OSD

setting is available in text and image mode.



Image size is required to be less than 16K.



Text should not exceed the software preview display.



Image format is available in bmp, jpg and jpeg.



Color setting is available in background and foreground.

Details as shown in figure 4.

User Manual

HD-F01-TX

Figure 3 Communication setting interface

will enter into the Communication