Datamars Active CollarTag Посібник із швидкого старту - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Сільськогосподарське обладнання Datamars Active CollarTag. Datamars Active CollarTag 9 сторінок.
Друкувати сторінкуAttaching Tags Quickstart Guide
6. Immerse the loaded Z2 tagger in sterilizing solution.
7. Position the tag between the two main cartilages, approximately halfway between the animal's
head and the tip of the ear.
If the EarTag is too close to the cow's head, then its range of motion may be limited by
If there is already a tag in cow's ear, then place the EarTag as close to the mid-point as possible.
ALWAYS APPLY THE MALE TAG IN THE BACK OF THE EAR.
8. Squeeze the handles firmly and hold closed. When the tags have locked together, the tagger
arm flicks and releases the tag preventing ripped ears.
9. To remove the tagger, pull straight down from the cow's ear in one smooth motion – no
need to open the handles.
catching on the ear.
Figure 4 EarTag attached next to NAIT tag
5