4M Disney Frozen II Code A Maze Посібник - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник для Іграшка 4M Disney Frozen II Code A Maze. 4M Disney Frozen II Code A Maze 16 сторінок.

7. Storing the codes

Once the code cards have been arranged, it is time to instruct Elsa to solve the maze. There is a

scanner on the bottom of the main board. This is where the code cards are scanned. Starting with

the first card, put each card on the scanner in the desired direction to scan the black & white code

underneath and add it to the program code. Do this by aligning the three dots on the edge of the card

with the dots above the scanner, and then press the button underneath the single dot near the centre

of the card. The main board will beep once to indicate that the card was scanned successfully. If the

main board does not beep or beeps twice, this indicates that the card was not scanned successfully

and you will need to scan the card again.

Make sure the code card is aligned tightly with the edge of the scanner, otherwise any light that

passes though the gaps may affect the scanning process and cause Elsa to move in a random manner.

If you notice some errors, restart the coding process by scanning the

incomplete circle with an arrow). All previous codes will be cleared. You will hear two long beeps

to indicate that the codes were cleared successfully.

DETAILED INSTRUCTIONS

CLEAR card (the