Datamaster T0046 Посібник користувача - Сторінка 19
Переглянути онлайн або завантажити pdf Посібник користувача для Мережевий кабель Datamaster T0046. Datamaster T0046 19 сторінок. Professional lan cable tester
Друкувати сторінку®
Datamaster
T0046 Professional LAN Cable Tester – User Guide
12
MEMORY FUNCTION
There are 24 memory locations:
• 8 for LAN mode
• 8 for TEL Mode
• 4 for COAX Mode
• 4 for LENGTH Mode
12.1
STORING A SCREEN TO MEMORY
Whilst a test result is being displayed, it can be saved into memory by briefly pressing the
key. The memory location is momentarily displayed on the top right hand side of
MEMORY
the screen.
12.2
RECALLING A SCREEN FROM MEMORY
To recall a screen from memory, enter the appropriate mode (by pressing one of the blue
coloured MODE buttons) and then press and hold the
seconds. The results of the first memory location will be displayed. Typical memory screens
are shown below:
Use the
UP / DOWN NAVIGATION
12.3
TO CLEAR SCREENSHOTS FROM MEMORY
Whilst viewing any screen in memory mode,
press the
key and the screen opposite will
TEST
be displayed.
Use the
LEFT / RIGHT NAVIGATION
either cancel or retain the data stored in
memory.
If desired, enter another mode (by pressing one of the blue coloured mode selection buttons)
and repeat the procedure.
13
BATTERY ALARM & REPLACEMENT
When the voltage of the battery drops to 6
volts, the battery icon on the left center of
the screen will start to blink.
Undo the Philips-head screw on the battery
compartment lid on the rear of the tester and
replace the battery.
MEMORY
keys to toggle between memory locations.
keys to
key for at least three
Page 15