CBT Supply flipIT RIMLESS Інструкція з монтажу Посібник з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Робочий стіл CBT Supply flipIT RIMLESS. CBT Supply flipIT RIMLESS 12 сторінок. Convertible computer workstation

Друкувати сторінку

1. Place flipIT lid into cut-out.

2. Install simple arm

using two 1/2" Phillips drive wood screws,

install the short bracket loosely so the micro-

gap can later be adjusted. The bracket slots

are oblong for this purpose.

It is easiest to assemble on a table prepared

with a furniture blanket to protect the ther-

mofoil surface. Place the flipIT lid into the

cut-out with the VESa bracket mounting

holes "pointing" to the side with curved edge,

where the keyboard tray installs.

on flipIT lid, use a #2 Phillips to break the thermofoil

Install the pivot into

the short bracket,

finger tight, so it

can be adjusted for

depth.

Press a nylon bushing

into the simple arm

so the spacer washer

FIK19R Rimless flipIT ® by SMaRTdesks®

Keyboard installs here

Mounting holes "point"

to keyboard edge

pilot holes for easier installation.

is between the

moving parts.

www.smartdesks.com

800-770-7042