Datamax H-Class Посібник із швидкого старту - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Виробник етикеток Datamax H-Class. Datamax H-Class 12 сторінок. Cutter option
Також для Datamax H-Class: Посібник (8 сторінок), Посібник (14 сторінок), Посібник (10 сторінок), Посібник (12 сторінок)

Datamax H-Class Посібник із швидкого старту
C) Press the FEED Key several times, until media tracking is normalized through the printer. Then, while
feeding several more labels, observe the flow of the Ribbon from the Supply Hub. Proceed
according to your observations:
If the ribbon flow is rippling, or if bagging is present, proceed to D; or,
If the ribbon flow is evenly tensioned and smooth, proceed to E.
FEED
Key
D) Slightly loosen the Support Cover Screw and, while repeatedly pressing the FEED Key, slowly
adjust the Idler Adjustment Screw to smooth the ribbon flow from the Supply Hub. Afterward,
carefully tighten the Support Cover Screw, and then feed several more labels to verify your
adjustment.
Supply Hub
smooth the ribbon flow
Idler Alignment
Screw
5
Ribbon
Supply
Hub
observe
for flow
Support Cover
Screw