Datamax M-Class Mark II Посібник із швидкого старту - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Зчитувач штрих-коду Datamax M-Class Mark II. Datamax M-Class Mark II 8 сторінок. Rfid option
Також для Datamax M-Class Mark II: Посібник (6 сторінок), Посібник (8 сторінок), Посібник із швидкого старту (4 сторінок), Посібник (10 сторінок), Посібник із швидкого старту (8 сторінок), Посібник із швидкого старту (6 сторінок)

This guide presents a systematic overview of important media requirements, setup options, and modes of

use for Datamax-O'Neil M-Class RFID-equipped printers.

•

This device complies with FCC Radio Frequency exposure limits for an uncontrolled

environment. This equipment should be installed and operated with a minimum

distance of 20cm between the radiator and your body. If 20cm distance cannot be

CAUTION

maintained, end users are to be 20cm from printer extremity.

•

Any changes or modifications to this RFID module not expressly approved by

Datamax-O'Neil Corporation will void the user's authority to operate the equipment.

•

Operation is subject to the following conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference

that may cause undesired operation of this device.



Note:

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct

the interference at their own expense.