DUTSCHER ClearLine UVT-B-AR Інструкція користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція користувача для Лабораторне обладнання DUTSCHER ClearLine UVT-B-AR. DUTSCHER ClearLine UVT-B-AR 17 сторінок.
Друкувати сторінкуELECTRICAL SAFETY
Connect only to the mains with voltage corresponding to that on the serial number
•
label.
Do not plug the unit into an ungrounded power socket, and do not use an ungrounded
•
extension lead.
Ensure that the power plug is easily accessible during use.
•
Disconnect the unit from the mains before moving.
•
If liquid penetrates into the unit, disconnect it from the mains and have it checked by
•
a repair and maintenance technician.
Do not operate the unit in premises where condensation can form. Operating
•
conditions of the unit are defined in the Specifications section.
DURING OPERATION
Do not operate the unit in environments with aggressive or explosive chemical
•
mixtures. Please contact manufacturer for possible operation of the unit in specific
atmospheres.
Do not operate the unit if it is faulty or has been installed incorrectly.
•
Do not use outside laboratory rooms.
•
Do not operate the unit without dust filters installed.
•
Do not work in the box while the open UV lamp is switched on. BIOLOGICAL SAFETY
•
The user is responsible to carry out appropriate decontamination if hazardous
•
material spills on or penetrates into the equipment.
The user is responsible for decontamination of the unit before its decommissioning
•
and utilization.
3.
General information
DNA/RNA UV-Cleaner boxes – UVC/T-AR, UVC/T-M-AR, UVT-B-AR and UVT-SAR
– are designed for clean operations with DNA/RNA samples. They provide protection against
contamination.
All models are bench-top type, with metal framework, glass or acrylic walls and
working surface painted with powder enamel or made of stainless steel. Box is equipped with
inlet for power cables and built-in power outlets for units inside the box. For availability of the
required characteristics, please clarify for each model separately (see 7.1 on page 11).
UV-Cleaner boxes are equipped with an open UV lamp installed in the upper hood.
UV radiation from the open lamps disinfects the working area inactivating DNA/RNA
fragments during 30 min of exposure. A digital timer controls duration of the direct UV
irradiation. A daylight lamp provides proper illumination of the working surface.
5