Datapath VSN Series Посібник із швидкого старту - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Контролер Datapath VSN Series. Datapath VSN Series 20 сторінок. Wall controller
Також для Datapath VSN Series: Посібник із швидкого старту (20 сторінок), Посібник із швидкого старту (20 сторінок)
Друкувати сторінку
STEP 7 WINDOWS 10 SETUP
Once the system has been built and configured in our factory the operating system is
resealed, therefore when switching the system on for the first time, the operating
system setup commences. You will be prompted to enter information to set up the
Windows 10 operating system.
There is no requirement for users to activate Windows 10, activation is done
automatically. An internet connection is required for the automatic activation.
STEP 8 DISPLAY CONFIGURATION
Once the Windows 10 setup is complete, the VSN wall controller will reboot and the
control screen will show a Windows desktop displaying the Display Driver
Configuration Tool (DDCT). The DDCT will guide you, step by step, through the
configuration of the graphics outputs, enabling you to quickly create one or more
video walls.
On the final stage of the configuration, the DDCT will recommend the optimum way
to connect your VSN wall controller to your video wall displays.
A full description of the DDCT can be found in the User Guide located on the
Documentation Media.
It is recommended that you carefully read the instructions on each page of the
wizard. To commence your wall configuration, click on "Start Wizard" .
Page 7