Dataprobe IP-410 - Посібник - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник для Перемикач Dataprobe IP-410 -. Dataprobe IP-410 - 17 сторінок. Web controlled power switches

Друкувати сторінку
iPAL
Upon entering the password, the main menu is displayed:
Location
Mode = 6
1.
Outlet 1
2.
Outlet 2
3.
Outlet 3
4.
Outlet 4
5.
6.
7.
8.
#
- Select relay to toggle
P# - Pulse relay
S
- Setup
X
- Exit
Enter >
Select S to access the setup Menu
iPal Setup
1. Circuit Names

2. Location Name

3. Operating Mode
4. Password
5. Pulse Time
6. Web Page Refresh Time - 10
X. Return to the Main Menu
Enter >
Circuit Names
* For All Models *
Each circuit (outlet) can be identified with a 20-character name for easy identification. Select 1 from the Setup menu. A list of
all eight circuits is displayed with the option to change any circuit name. These names are used in both the telnet screens and
web page. For Models iP-415 and iP-410, enter names for circuits 5-8 if the expansion unit is used.
Location Name
Each iPAL can be identified by a Location name that appears at the top of each telnet and web page. Select 2 from the
Setup Menu to set the Location, up to 20 characters.
Status
ON
ON
ON
ON
OFF
OFF
OFF
OFF
- Location
- 6
- 10
* For All Models *
Feedback
OK
OK
OK
OK
OK
OK
OK
OK
Page 10