AGRI-COVER Lomax Stance Інструкція з монтажу Посібник з монтажу - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Автомобільні аксесуари AGRI-COVER Lomax Stance. AGRI-COVER Lomax Stance 13 сторінок.

Друкувати сторінку

2. INSTALLING COVER (Continued)

G. Swing pivot links out from clips and

attach anchors.

H. With anchor's post toward cover, test

placement on top of cab in flat area between

ribs, then mark location. Repeat for opposite

side.

IMPORTANT: Ensure 1 to 1-1/2" space

between cover and closest point on cab.

NOTE: Improper placement of anchors will

require ordering replacements.

I. Release pivot link from anchor and secure in

clip on each side.

CAUTION: Air and surface temperatures

must be above 60° F for proper adhesion.

J. Clean marked locations with alcohol pad.

K. Shake primer and squeeze at black dot to

start liquid flow, then prime marked locations.

CAUTION: Strong magnetic pull may

cause improper placement.

L. Peel adhesive liner from anchors and

adhere to marked locations. Apply pressure

for 10 seconds, then close cover.

NOTE: After installation, cover should remain

in closed position for at least 48 hours.

During this time period, anchors bond to cab

and cover typically conforms to truck box.

Pivot link attached

to anchor

Ensure 1 to

1-1/2" space

Anchor's post

Flat area on

top of cab

Clean

marked

locations

Anchor