AGRI-COVER VANISH Інструкція з монтажу Посібник з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Автомобільні аксесуари AGRI-COVER VANISH. AGRI-COVER VANISH 17 сторінок. Roll-up cover
Друкувати сторінку
1: INSTALLING SIDE RAILS (Continued)
I. Adjust side rail flush with top of box, install second clamp on side rail at midway point.
Repeat clamping procedure.
J. At rear of box, place rear clamp as close to tailgate as possible. Adjust side rail
height until flush with top of tailgate. Repeat clamping procedure.
IMPORTANT: To keep side rail secured on truck, ensure clamp teeth engage
grooves on side rail, turn nut finger tight, then use wrench to finish tightening.
1
Clamp
st
2
Clamp
nd
3
Clamp
rd
NOTE: For trucks with electric tailgates, cover and tailgate should remain closed after
installation for at least 24 hours. During this time period vinyl flap typically conforms to
tailgate allowing electric tailgate to function properly. If interference occurs after this time
period, raise side rail at rear slightly above tailgate.
K. Repeat Step 1 to install side rail on opposite side.
L. Torque all clamps to 20 ft-lbs or value specified in special instructions (if supplied).
5