DataRemote Pots In a Box CDS-9090 Посібник із швидкого старту - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Бездротовий маршрутизатор DataRemote Pots In a Box CDS-9090. DataRemote Pots In a Box CDS-9090 2 сторінки.
Друкувати сторінкуSTEP 2
Connect the WAN port of your device to a modem, switch,
router or Internet with an Ethernet cable (RJ-45).
DISCLAIMER: This is just a representation of a modem.
Modem models and appearance may vary
depending on your Internet provider.
STEP 3
Connect to one of the four LAN ports on your device with
an Ethernet cable (RJ-45) to your equipment or computer
that needs to receive an Internet connection from the
DataRemote CDS-9090 device. Your device allows you to
connect up to four (4) devices.
Cellular antenna connectors
Front panels
LED status
SIM cards slots
WHAT IS ON THE
FRONT OF YOUR DEVICE?
Eight (8)
FXS phone line
ports
STEP 4
Connect the RJ-11 (Phone line) from your phone or
equipment requiring a phone line to the DataRemote
CDS-9090 device's FXS port programmed for your phone.
WARNING!
Do not connect an active RJ-11 with voltage directly from the wall
into the DataRemote device's RJ-11 ports, this will damage the
device permanently. Each DataRemote device's RJ-11 FXS port is
an active port supplying voltage. The FXS port is only to be
connected to an FXO analog phone or another FXO device.
Wi-Fi antenna connectors
Four (4)
SFP port
Ethernet
(High speed
ports
data transfer)
WAN
Wide Area Network
(Internet)
port
ON/OFF
button
AC power
cord connector
!"#$%$&' (&) **3 ,-. /*/*