DV8 TC-6 Посібник з інсталяції - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з інсталяції для Автомобільні аксесуари DV8 TC-6. DV8 TC-6 6 сторінок. Tire carrier

12. Install the new rubber cap over the axle

bolt bearing area on tire carrier. This piece

will help keep the bearing clean and smooth.

13. Locate the spare tire inner mounting

bracket and nuts and bolts for it. See picture.

14. Bolt to the outside of the tire carrier. In

order to make sure your tire will clear the

bumper use a helper to lift spare tire up to

see how far up to mount the bracket. Torque

the bolts to 25lbs. Note: To minimize shaking

you want the spare to be at the lowest level

necessary to clear the bumper.

15. Bolt the outer portion of the spare brack-

et to the inner part. Keep the bolts a little

loose. With the outer all the way extended,

place the spare on it and push tire till tire

touches the carrier. Remove tire. Slide outer

part of bracket in extra 1/4 inch and torque

bolts to 40lbs. Re-install tire using the lug

nuts supplied with our kit. Torque to 50lbs.