Convoy Performance Series Посібник користувача та інструкція зі встановлення - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача та інструкція зі встановлення для Монітор Convoy Performance Series. Convoy Performance Series 6 сторінок. Lcd color monitor
Також для Convoy Performance Series: Посібник користувача та інструкція зі встановлення (6 сторінок), Посібник користувача та інструкція зі встановлення (6 сторінок), Посібник користувача та інструкція зі встановлення (6 сторінок)

Owner's / Installation Manual

Performance Series

Mounting the Monitor

1) Select a location allowing 2" space between monitor and walls, cabinets, or other objects to allow adequate air circulation

around it. Avoid enclosed spaces, areas with excessive vibration or subject it to severe impacts.

2) Never use this device in environments with excessive moisture, dust or smoke

pinched or stepped on. Monitor is not designed to be waterproof.

3) The device may be powered by a 12 or 24 volt automotive battery or vehicle electrical system.

4) Make sure all cables are connected properly, observe polarity. Improper cable connections may damage the monitor. Remove

the power cable connections when you do not intend to use the unit.

Attach bracket to monitor here

Supplied Accessories

When the trigger wire is energized, the monitor automatically switches to view that Camera (Green for Camera 2, White for

Camera 1). When voltage is removed from the trigger wire, monitor returns to previous view.

•

If the monitor is off, when the trigger wire is energized, the monitor will turn on to show Camera 2. This safety feature is par-

ticularly useful for night driving, as the monitor light can be distracting to the operator. Mode will adjust monitor brightness

in different presets.

•

Grid bars are available when triggered to assist in backing. They may be turned off in the menu. When there is no voltage on

the trigger wire, the on screen display will show "CAM1" or "CAM2" .

Convoy Technologies 6409 Highview Drive | Fort Wayne, IN 46818 | Ph (888) 565-2583

M7202

Installation Notes: Trigger wire function

•

and both work whether or not the trigger wire is connected . When us-

ing the monitor, you may cycle between them to monitor either camera.

Connecting the Monitor

Cam1 Trigger (White) +12V~24V DC

Cam2 Trigger

GND (Black)

Power (Red) +12V~24V DC

Cam2 Trigger (Green) +12V~24V DC

Cam1 Trigger (White) +12V ~24V DC

Camera 1 and Camera 2 connections are powered from the monitor

Do not place cables where they may be