Datasheen D902AW Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Мережевий маршрутизатор Datasheen D902AW. Datasheen D902AW 19 сторінок. Adsl2/2+ wifi router
Друкувати сторінку3. CONFIGURATION
3.1 DEFAULT CONFIGURATION
ADSL MODEM has pre-configured with the VCI/VPI which is in common use. The default dial-up mode
is bridge encapsulation. For bridge mode, no need to configure any more parameter. However, the third party
dial-up software is needed for connection with the Internet.
3.2 COMPUTER CONFIGURATION
The default IP address for ADSL MODEM is: 192.168.1.1; The Subnet Mask is：255.255.255.0. Users can
configure ADSL MODEM through an Internet browser. ADSL MODEM can be used as gateway and DNS
server; users need to set the computer's TCP/IP protocol as follow:
1、 Set the computer IP address at same segment of ADSL MODEM, such as set the IP address of the
network card to one of the "192.168.1.2"～ "192.168.1.254".
2、 Set the computer's gateway the same IP address as the ADSL Modem's.
3、 Set computer's DNS server the same as ADSL Modem's IP address or that of an effective DNS server.
3.3 ADSL MODEM CONFIGURATION
3.3.1 LOG IN
Open the browser; input http://192.168.1.1 at the address column. Press "Enter" key then the entry dialog
box will show up as Figure 3.1. Input Username: admin , Password: password (capital sensitive), then press
Enter.
3.3.2 SAVE SETTING
After getting through each page for parameters setting, click "Save" or "Save apply" to store the value in
ADSL MODEM. Briefly, we named "Save".
Figure 3.1
Page 6
Datasheen D902AW User Manual
Total 19 Pages