DV8 OFFROAD RBJL-09 Посібник з монтажу - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з монтажу для Автомобільні аксесуари DV8 OFFROAD RBJL-09. DV8 OFFROAD RBJL-09 9 сторінок. Rear bumper for 2018+ jeep jl wrangler

Друкувати сторінку

INSTALLATION

MANUAL

STEP 10 |

Install the brackets onto

the bumper using the provided M14x35

hardware. Use a 10mm allen bit, 21mm

socket, and a 21mm wrench.

We provided an allen head bolt to be used

for the exterior mounting on the bottom

corners.

Secure the brackets and leave only

enough slack for the brackets to be

adjustable.

STEP 11 |

Slide the nut plate into the

passenger frame rail lining it up with the

mounting holes on the bottom.

STEP 12 |

Lift the bumper to the

vehicle and loosely secure using the

factory hardware and a 21mm or 18mm

socket.

Ensure the wiring is not pinched during

install.

Note: It is recommended to open the tailgate

prior to installing the bumper.

The tool required may vary based on model.

NEED HELP?

855-680-9595