Convoy W1000TX Посібник користувача та інструкція зі встановлення - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача та інструкція зі встановлення для Приймач Convoy W1000TX. Convoy W1000TX 5 сторінок.

Друкувати сторінку
W1000 KIT Operation
Installing and using the W1000RX Receiver
The W1000RX receives it's power from the monitor it is connect-
ed to.
Connect the W1000RX camera cable to the monitor
•
Turn the monitor on to power the W1000RX
•
Push and hold the red pairing button till the LED flashes con-
•
stantly and release
Push and hold the red pairing button on the W1000TX trans-
•
mitter till the LED flashes constantly and release
LED on both will stay on when connected
•
The W1000RX will pair directly with Convoy C1300RF camera, or TrailerCam.
On the C1300RF, push the "B" button repeatedly till the 4 green LED 's are all off, then
•
push and hold the "B" button for 6 seconds and release. The camera is now in pairing
mode, you have 50sec to pair with the W1000RX
•
On the W1000RX, Push and hold the red pairing button till the LED flashes constantly and
release.
Once paired the LED will be on constantly.
•
Convoy Technologies 6409 Highview Dr | Fort Wayne, IN 46818 | Ph (888) 565-2583
Owner's / Installation Manual
W1000KIT (consists of receiver and transmitter)
2.4GHz Wireless Transmitter and Receiver
FHSS channel hopping sequence based on an
algorithm generated by the receiver
Zero Latency, Zero RF/Engine/Electronic Inter-
ference
W1000TX Transmitter
Transmitter will pair with a Convoy Technologies
Wireless Monitor or Receiver, Connect any
wired Convoy camera
W1000RX Receiver
Receiver will pair with any Convoy Technologies
Wireless Camera or Transmitter, up to 100ft