DVB GX470 Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу для Автомобільні аксесуари DVB GX470. DVB GX470 6 сторінок. Rear window interior molle panel
Друкувати сторінку
INSTALLATION
MANUAL
STEP 4 |
Install the molle panel
utilizing the factory mounting points and
hardware with a philips head screwdriver.
STEP 5 |
Loosely install the
aluminum spacers at the bottom of
the molle panel using the provided
M6x12 hardware (This is the shortest
hardware provided). Use a 4mm allen bit if
necessary.
Adjust the up and down position to your
liking and tighten the factory bolts to
prevent it from shifting when finished.
STEP 6 |
Mark the mounting holes
for drilling by slowly pushing the panel
against the body of the vehicle and
marking with sharpie where the threaded
stud lands.
Once marked, remove the entire assembly
to prepare for drilling by removing
the factory bolts with a philips head
screwdriver.
NEED HELP?
855-680-9595