Datavideo DAC-10 Інструкція з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Перемикач Datavideo DAC-10. Datavideo DAC-10 10 сторінок. Datavideo dac-10: quick setup
Також для Datavideo DAC-10: Швидке налаштування (2 сторінок), Швидке налаштування (4 сторінок)
Друкувати сторінку
1.AUDIO ENCODE
2. DV INPUT
3. ANALOG YUV VIDEO
INPUT
4. ANALOG S (Y/C)
VIDEO INPUT
5. ANALOG COMPOSITE
VIDEO INPUT
6. COLOR PROCESSOR
7. AUDIO LEVEL
INDICATORS
8. AUDIO INPUT LEVEL
CALIBRATION
Encode analog audio to DV with your choice of 12 bit/32Khz or
16bit/48Khz. 12 Bit/32khz is suggested for most DV Camcorders.
16bit/48Khz is suggested for DVD and DV Capture cards.
This switch will turn red when you press it. When it is red, the DV input is
enabled. When another input is enabled this switch will turn green.
This switch will turn red when you press it. When it is red, the Analog
YUV video input is enabled. When another input is enabled this switch
will turn green.
This switch will turn red when you press it. When it is red, the Analog
S (Y/C) video input is enabled When another input is enabled this switch
will turn green.
This switch will turn red when you press it. When it is red, the Analog
Composite video input is enabled When another input is enabled this
switch will turn green.
This control will adjust the color of both analog or DV input sources.
Press the knob to select Contrast, color or tint (NTSC only).
Rotate the knob to change the amount.
Note: Press the knob and hold for two seconds for resetting all
adjustments back to default (unity) setting
These meters show the audio INPUT level from the incoming source
Turn these knobs to adjust the Audio OUTPUT level of the DAC-10.
Adjust the audio level controls for each left (channel one) and right
(channel 2) to let level LED's indicating in between yellow (0dB) and
first red LED (+4dB).
1