Datavideo MCU-100 Посібник користувача - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник користувача для Контролер Datavideo MCU-100. Datavideo MCU-100 18 сторінок. Multi-camera controllers for panasonic cameras
Також для Datavideo MCU-100: Посібник із швидкого старту (2 сторінок)

Datavideo MCU-100 Посібник користувача
How to update the AD-1 firmware with the NuMicro ISP Programming Tool
Note: It is best to update the firmware of the AD-1 unit(s) at the same time as the MCU-100.

Specifications

Power Consumption
Weight
Dimension
Input /Output Connection
Connection Distance
Install the software tool by using the "Setup, NuMicro ISP
Programming Tool, v1.42"on your Windows 7 PC.
Connect the USB cable to the AD-1 Micro USB port and then to
your PC.
Use the desktop Icon to launch the software tool.
Select "Connect"
Click on the Load File "APROM" button and then browse to the
location of the Firmware bin file.
Click on the Program "APROM" radio button, and then click on
the "Start" button to begin the update process.
A firmware update progress bar will be shown at the bottom of the
window.
Once finished the program will show PASS and then disconnect
the AD-1.
Remove the USB Cable and then connect the AD-1 to the
camera's remote port to test the new firmware.
DC 12V / 0.5A ( 6W )
350 g
95mm (W) x 208mm (H) x 54mm (D)
RJ45 x 4
Up to 300m (CAT-5 or CAT6)
16