Datavideo TP300-B Інструкція з експлуатації - Сторінка 18
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Професійне відеообладнання Datavideo TP300-B. Datavideo TP300-B 18 сторінок. Tablet
Друкувати сторінкуPROMPTER KIT FOR TABLET
Adjusting the lower rail of the prompter frame
Depending on the size and shape of the tablet used, it may be necessary to adjust the position of the lower rail on the
prompter frame (Item A on page 6). The lower rail of the prompter frame can be removed and relocated. This is to move
the position of the tablet forwards away from the camera position or backwards towards the camera position.
To do this you will need the hex tools provided with the TP-300 kit (Item B on page 6).
1.
First carefully dismantle the current TP-300 set up to remove the prompter frame (Item A).
2.
Lay the prompter frame upside down on a flat surface so you can see the lower hex screws.
3.
Use the larger hex tool (Item B) to remove the lower rail from its current position. Leave the pillars of the frame
connected to the other rail. Be careful not to lose any Hex screws.
4.
Re-locate the lower rail to its new position, either one hole backward or forward of where it was originally.
5.
Secure the rail in its new position using the same Hex tool and screws.
You can now rebuild the TP-300 set up with the modified prompter frame by using the supplied assembly directions
from page 8 onwards.
Cleaning the 60/40 Glass
This product contains a sheet of 60/40 glass please handle it with care.
To avoid a risk of damage or injury please follow this instruction manual and use caution when
transporting, un-packing, cleaning, assembling or dis-assembling this part of the product.
Datavideo recommend cleaning the glass regularly to remove dust and finger print marks. This will
ensure the best image quality is recorded when the camera is looking through the glass.
Never attempt to clean the glass whilst it is mounted in the prompter instead remove it carefully from the prompter,
clean the glass and then re-install it into the prompter frame. Handle the glass carefully using the cloth covered edges of
the glass at all times.
To retain the required qualities of the glass and to avoid scratching the glass during cleaning.
•
Never use abrasive cloths, pads or abrasive based cleaning fluids on the glass.
•
Never use cleaning fluids based on an acid or vinegar solution.
TP-300
17