DVS EC PREMIUM CONNECT Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Вентилятор DVS EC PREMIUM CONNECT. DVS EC PREMIUM CONNECT 6 сторінок.
Друкувати сторінкуYour DVS® Premium
Connect system
represents the latest in
positive pressure home
ventilation technology.
The large easy to read
touch screen allows you
to see what Is happening
with your system and to
make adjustments if you
need to. The system Is
also able to be connected
to your home Internet
to allow trouble free,
automatic downloads of
software Improvements.
On your home screen (top to bottom)
Note: We will expand on the use of the home screen and the icons listed below, later in this user guide.
WiFi connection indicator:
not you are connected to your home WiFi router.
24-hour clock:
This is updated via the internet or
11:20
where you have no internet connection you are able to
manually adjust.
System settings
Day or Night:
Near the top right of the screen is
a small Sun
or Moon
in the DVS® to make the system behave differently
depending on the time of day or night.
Note: Typically, this is not needed as the system
will self-adjust to the changes in day and night
temperature, humidity and CO
would like to find out more about this setting please
call us on 0800 387 387.
Fan:
The fan icon near the top right of the screen will
rotate if the system fan(s) is rotating.
Note: if it is not rotating the system has stopped the
fan(s). This could be for a number of control logic
reasons and is nothing to be concerned about.
House:
In the "roof space" section of the house you
can see the air supply temperature and humidity level
bar indicator. The "inside" section of the house shows
you the temperature and humidity level at the control
panel and also a bar indicating CO
The humidity levels indicated are Absolute Humidity.
For further assistance please call DVS
24-hour
Clock
Wifi
Connection
Indicator
House
Humidity Levels
CO
Levels
2
Bottom Bar
Please see below an explanation of what each home screen icon means or is used for.
This Indicates whether or
icon. There is an ability
levels if needed. If you
2
levels in the home.
2
CO
levels
2
Note: The system is equipped with one CO
sensor. A plug-in device which pairs with your
Connect control panel. If the CO
is enabled (using the Settings menu) the system is
programmed to increase the ventilation rate when
the CO
level rises above 1000ppm. For specific
2
CO
level information see the graphs section of
2
the diagnostics menu. The system can be fitted
with up to 4 of these remote sensors. When more
than one sensor is fitted the system calculates the
average CO
concentration across the sensors.
2
Set Temperature and adjustment:
the house is an up arrow
temperature. The temperature displayed is the target
temperature the system will try to achieve when
the air supply temperature is able to help achieve it.
You can touch the
and
temperature.
DVS®:
Touch the DVS® logo briefly and our phone
number will appear.
The bottom bar:
The bottom bar is where you will
see any system notifications appear.
on 0800 387 387
®
System Settings
Day/Night
Fan
Set
Temperature
& Adjustment
DVS® logo
2
control function
2
To the right of
, a down arrow
and a
icons to adjust the set
2