Datecs Linea Pro 5 Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Зчитувач штрих-коду Datecs Linea Pro 5. Datecs Linea Pro 5 18 сторінок.
Також для Datecs Linea Pro 5: Посібник користувача (20 сторінок)
Друкувати сторінку1 DATECS
GETTING STARTED
LineaPro 5 Industrial has rechargeable Li-ion battery. Can be charge from USB port or External features
connector. Power source can be variable from USB wall adapters, Datecs power stations ...
Before first use, battery must be fully charged.
If the device is fully discharged, charging time to fully charged would be approx.
4 hours and 30min (for more details please refer to the table below).
LineaPro5 Industrial battery always start to charge when external power was provided. Charging stops
when battery is fully charged. Charging power can be "LOW" and "HIGH" and depends on Apple device
connection state. (valid for firmware version 01.05.68.47)
External Power supply*
500mA
1000mA
>1000mA
*Maximum current which can provide the power supply
LOW – 350mA
HIGH – 580mA
Charging form USB adapter:
UM 07.01.19/v1.0.0
LINEAPRO 5 INDUSTRIAL
Apple device connected
LOW
LOW
HIGH
USER MANUAL
Apple device disconnected
LOW
HIGH
HIGH
10