Austin Hughes Infra Power ATS-H8US-20A_L5-20P Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Перемикач Austin Hughes Infra Power ATS-H8US-20A_L5-20P. Austin Hughes Infra Power ATS-H8US-20A_L5-20P 12 сторінок. Autom230v amp : 10a / 16a outlet : c13 / c19; 208v amp : 20a outlet : c13 / c19; 110v amp : 15a / 20a outlet : us nema
Друкувати сторінку
< 1.3 > Installation
Before Installation
■
It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■
Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
All electrical power and power control wiring must be installed by a qualifi ed electrician
and comply with local and national regulations.
Don't exceed the outlet, branch or phase limitations
1
2
3
UM-IP-ATS-Q415V6
Step 1
Use the provided screws to attach the mounting bracket set
( set of 3 ).
Step 2
Use the M6 screw set to secure the ATS to your rack
( M6 screws not provided ).
M6
screw
Step 3
Use the cable ties to fasten each power cord to the
cord retention tray ( cable ties not provided ).
Cable
tie
P.3
www.austin-hughes.com