Austin Kontore Leopold Bench Kit Посібник з монтажу - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з монтажу для Зберігання інструментів Austin Kontore Leopold Bench Kit. Austin Kontore Leopold Bench Kit 12 сторінок. Children's version

Друкувати сторінку

See where the Rear Legs and the Front Legs overlap? It's a

triangle-like shape.

Goal: You want to put a little wood glue or

construction adhesive where they overlap.

To get the glue in the right place, first align the parts, and

then draw two lines on each leg assembly.

both leg assemblies.

Remove the Rear Legs and spread glue in the triangle area.

Important: Don't overdo the glue or the pieces won't

come together nicely. Make a small "triangle" of glue.

Important: Construction adhesive does not stain, and

can be difficult to sand off. Try to avoid getting any on the

face (exposed surfaces) of the wood. Clean up excess right

away.

With the Rear and Front legs aligned and glued, it is now

time to drill (3) holes per leg.

Goal: The holes will be drilled in the triangle area

where the glue was applied.

REPEAT for

Page 6 of 12