Cookology SEP602SS Інструкція з експлуатації - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Варильна поверхня Cookology SEP602SS. Cookology SEP602SS 15 сторінок. Cooking hob
Друкувати сторінкуINSTALLATION
The installation must be carried out by a suitably qualified person, in accordance with
the current version of the following.
o AS/NZS 3000: 2007 Wiring Regulations
o 2010 Electricity Safety Regulations
Positioning
The adjacent furniture must be able to withstand a minimum temperature rise of
100°C above ambient temperature of the room it is located in, during periods of use.
This appliance is classified as Class 3 and therefore is to be built into a kitchen unit
(depending on size) or 600 mm worktop that is at least 30 mm thick. The following minimum
clearance distances must be observed:-
o 700 mm between the hob surface and the underside of any horizontal surface above it, for
example a cooker hood.
o 50 mm clearance around the sides and front of the appliance.
o 50 mm clearance between the back of the hob surface and the wall behind it, measured
from the cut-out.
o If the hob is positioned so that the right or left hand side of the appliance will be near to the
edge of a kitchen unit. There must be a gap of at least 150 mm between the side of the hob
and the vertical surface of the kitchen unit.
Unpacking the Appliance
When unpacking the appliance please check that the following items are contained within
the packaging:
1 Hob
1 Installation and instruction manual
4 Fixing screws
4 Fixing brackets
8